Stream Studio > Introduction

Complete these checks before opening Stream Studio to make sure your auction, presentation and streaming setup are ready.

Check Your Auction and Presentation

Step 1: Confirm the correct multi-lot, in-room auction is selected.

Step 2: Confirm the correct auction presentation is selected and contains the required layouts and elements.

Step 3: Confirm any scenes required during the stream have been configured.

Check Your Streaming Setup

Step 1: Confirm Auctions Live Stream Pro is active by checking the Stream Key section for the two icons.

Step 2: Confirm the client's YouTube channel is configured and ready to receive the live stream.

Step 3: If you are unsure whether the streaming setup is enabled, contact your Auctions Live representative.

Prepare Your Devices

Step 1: Connect the required camera, microphone and USB devices before launching Stream Studio.

Step 2: Confirm the computer recognises the camera and microphone and that they are available for selection.

Step 3: Make sure the camera and microphone are not being used by another application.

Step 4: If multiple cameras or microphones are connected, identify the devices you want to use during the auction.

Check Your Camera Position

Step 1: Check that the selected presentation layout provides a suitable area for the camera.

Step 2: Confirm the camera will not cover important auction information.

Step 3: Use a relevant bid page through the Control Panel if you need to check the available camera area and position it correctly.

Prepare Your Computer

Step 1: Confirm the computer can comfortably run the auction presentation and Stream Studio.

Step 2: Use two separate monitors where possible, with one for the Control Panel and one for Stream Studio.

Step 3: If required, use separate computers for the auction presentation and Stream Studio.

Final Pre-Stream Check

☐ Confirm the correct auction and presentation are selected.

☐ Confirm Auctions Live Stream Pro and YouTube are ready.

☐ Confirm the required presentation layouts and scenes are configured.

☐ Confirm the camera and microphone are connected and available.

☐ Confirm the devices are not being used by another application.

☐ Confirm the camera has a suitable position within the presentation layout.

☐ Confirm the computer and monitor setup is ready.

Once these checks are complete, open Stream Studio and configure your live stream.

Disclaimer

This guide is provided as general information only. Features and functionality may change over time. If you are unsure, please contact your Auctions Live representative for assistance.